- EN 35 -
FM radio
Carefully extend the telescopic aerial in full. You can programme up to 50 pre-set radio
stations (FM).
Automatic tuning
1. Press the
SOURCE
button to select “RADIO” mode.
2. Hold the
button down so that the radio scans the frequencies and stops automatically
when it finds a station with a sufficient signal strength (50 pre-set stations).
3. The screen updates after a few seconds. The screen shows the station frequency.
4. Press
MEM
to display the pre-set radio stations.
5. Press
MEM+
or
MEM-
to listen to the radio.
6. To find other stations, hold the button down as before.
7. To scan the FM band in reverse (high frequencies to low frequencies), press the
button
and hold it down for 2 seconds.
Manual tuning
1. Press the
SOURCE
button on the main appliance to select RADIO mode.
2. Press
or
to reach a frequency. Every time you press the frequency adjustment
button, the frequency increases or reduces by 50 kHz.
3. Once you have found a frequency you want to save, press the
MEM
button on the remote
control. “P01” is displayed on the screen; press
MEM+/MEM-
until the memory number you
want is displayed on the screen. Press
MEM
again to confirm and save the current station.
4. Press
MEM+
or
MEM-
to display or listen to the radio.
(Comment: once the end of the frequency band is reached, the radio starts to search for
frequencies again, starting at the other end of the band. If no station is found, ensure that
the aerial is fully extended and test the reception by carrying out automatic tuning again in a
different location).
Bluetooth Mode
You need to carry out several steps to connect your mobile phone:
1. Activate the Bluetooth on your mobile phone (ensure you refer to the instructions for your
telephone).
