15
EN
MICRO SYSTEM
MIC215i
USING
SYSTEm CONNECTIONS
Speaker connections
Connect one speaker to the R terminal and the other
speaker to the L terminal.
Note
: Connecting speakers other than the speakers
supplied with the unit may damage the unit.
using the AC Adaptor
Using an AC adaptor other than the one supplied with the
unit may damage the unit.
A C
adaptor
To A C
outlet
To D C IN jack
FM antenna
ClOCK SETTING
Setting the clock can only be done in
STANDBY
mode.
CAuTIONS
:
• Before use, ensure the rated voltage of the adaptor
matches your local voltage.
• The included AC adaptor is for use with this unit only.
Do not use it with other equipment.
• If you are not going to use the unit for a long time,
disconnect the AC adaptor from the wall outlet.
• Whenever the AC adaptor is plugged in to a wall outlet,
electricity is running through the unit, even when the
power switch is turned off.
Fm ANTENNA
Do not connect the FM antenna to an outside antenna.
• Press and hold the
mEm/
button until the hour digits blink.
• Tap the
7
or
8
button to adjust to the desired hours then tap the
mEm/
button once to confirm. The minute digits will begin to
blink.
• Tap the
7
or
8
button to adjust to the desired minutes then
tap the
mEm/
button once to start clock.
Note:
In any mode, press the
DISPlAY
button, the current time will be shown on the display.
Summary of Contents for MIC215i
Page 2: ......
