THOMSON LDK 100, Technical Manual

Page: 25 / 63

Replacements Technical Manual LDK 100 - Camera Head
3-5
Opening the right side cover
To remove the right front cover proceed as follows:
a. Unscrew the four retaining screws
1
and swing the
right front cover down.
b. Disconnect the B, R and G coax cables from the
DVP board using the correct tool (part no. 5322 395
10802)
c. Unscrew the two top retaining screws
2
of the DVP
board and swing the board downwards.
d. Reach in behind the board and disconnect the flat
cable from the connector at the bottom of the
board.
e. Disconnect the flat cable
3
that comes from the
cover, from the motherboard connector
4
.
f. Loosen the screw
5
and remove the retaining tie
6
that restrains the cover.
g. Remove the cover.
B
R
G
x4
Removing the DVP board
To remove the DVP board proceed as follows:
h. Unscrew the two bottom retaining screws
7
of the
DVP board from the plastic clips and remove the
board.
i. Unscrew and disconnect the top connector
8
from
the DVP board.
j. Unscrew the bottom connector
9
.
Removing the front unit
To remove the front unit proceed as follows:
a. To ease the removal of the front unit remove the
adapter screws
1
completely.
b. Unscrew the four retaining screws
2
of the front
unit.
c. Move the front unit slightly upwards and forward
and disconnect the flat cable that comes from the
front from the connector on the connector board of
the camera.
d. Remove the front unit.
Clear
Clear
A 1
Star 4P
ND1/4
B 2
Star 6P
ND 1/16
C33
Soft focus
ND 1/64
D 4
1
1
2
2
2
3
4
5
6
7
8
9