THOMSON LDK 100, Technical Manual

Page: 24 / 63

3-4
Technical Manual LDK 100 - Camera Head Replacements
To remove the front unit the following steps have to be
carried out:
•
Remove the handgrip
• Detach the adapter
• Remove the camera left side cover
• Remove the camera right side cover
• Remove DVP board
• Remove the front unit
Removing the handgrip
To detach the handgrip follow the instructions given on
the previous page.
Detaching the adapter
To detach the adapter from the camera proceed as
follows:
Caution
Follow these steps in the order given. Loosening the
screws in the wrong order could result in
mechanical damage to the camera.
a. Loosen the two horizontal screws
1
at the front of
the camera.
b. Loosen the two horizontal screws
2
on the top of
camera.
c. Slide the adapter away from the camera along the
rail
3
at the bottom of the camera.
Front unit
Opening the left side cover
To open the left side cover proceed as follow:
a. Loosen the four screws
1
at the front of the
camera.
b. Swing down the cover
Caution
When reattaching the adapter be extremely
careful with the connectors between the camera
head and the adapter. Do not allow the guide pins
to damage the pins of the connector.
1
1
1
2
3