Operating your Receiver
You can connect up to 7 audio/video sources to this
amplifier:
Source button
Corresponding connector
(receiver front panel) (receiver back panel)
- DVD
DVD IN (audio / video)
- SAT
SAT IN (audio / video)
- VCR
VCR IN/OUT (audio / video)
- V-AUX
V-AUX IN (audio / video)
- CD
CD IN (audio only)
- TV
TV IN (audio only)
- TAPE
TAPE IN/OUT (audio only)
- FM/AM
built-in
When a source is selected, the arrow will point to the
source name on the display.
Example: Press
DVD
to select DVD as the source to
the amplifier.
Using the receiver to play a source
After having properly connected a source (DVD, CD,
VCR) to the receiver, you can partly control them
through the receiver.
Playing a DVD with the receiver
1. Connect a DVD player to the receiver (see con-
necting your receiver for details)
2. Press
ON/ECO
to switch on the receiver
3. Select the DVD source.
4. Switch ON the DVD player and start playback
5. Switch ON your TV
6. Select the appropriate A/V channel on the TV
(refer to your TV manual for details) until the image
from the DVD player is displayed
7. Set the sound Mode if needed (see "Advanced
sound control" for details)
Example 1:
To play 5.1 Dolby Digital surround sound
Press
SURR. MODE
button until "Dolby Digital"
appears on the Display and all of the speaker'’
icons light up.
Example 2:
DVD:
You may also need to select the Dolby Digital
5.1 on the DVD disc menu to have the digital sur-
round enabled providing that the disc is encoded
with Dolby Digital 5.1 (please refer to the DVD
player and DVD disc instruction)
Example 3:
LD:
You may need to select a different Audio
Channel on your LD (refer to your LD player manu-
al)
8. Adjust volume knob accordingly
NOTE
1. Your receiver has a built in tuner. Just con-
nect the appropriate antenna on the back of
the receiver and you will be able to listen to
radio stations. (See details in Tuner section)
2. Other sources can be connected to the
above standard source. Example: you can con-
nect a LD into the DVD inputs.
3. Refer to the "Connecting To Audio-Visual
Components" section for details on connec-
tion.
NOTE
To play Dolby Digital or DTS sound, the source
must be connected to the receiver via the opti-
cal or coaxial terminal
14
