Operating Your Receiver
EN
13
Switching on/off
• To switch on the receiver, press
ON/ECO
button once, or any source button on the remote
control.
• Standby: when the receiver is on, press the
ON/ECO
button once to activate the standby mode.
• To switch off the unit completely, unplug the
power cord from the socket.
Selection of Audio/Video source
When one of the audio/video source is selected, the
audio and video input corresponding to the name
will be activated.
The receiver acts as a switching device between all
the sources that are plugged into it.
Example 1:
If you connect a VCR player to the VCR input (audio
+ video) on the receiver and press the
SOURCE
or button on the main unit until VCR1/ANL
shows on the display. You can also press
vcr/V.AUX
on the remote to select the source directly. You will
be able to have the sound and image transmitted
by the VCR.
Example 2:
Based on example 1, the VCR input is selected. If
SAT is selected, image and sound from the SAT
source will replace the VCR.
MUTE
O N / E C O
tape
RDS
digital
cd
sat/cab
dvd/
theater
modes
delay
tuner
vcr/
V.AUX
stereo
level
up
dts
6 channel
tape
RDS
pty
hifi
digital
cd
sat/cab
dvd/
theater
modes
delay
tuner
vcr/
V.AUX
stereo
level
up
dts
dvd /cd
6 channel
tape
RDS
pty
hifi
vcr/sat
tv
cd
sat/cab
dvd/
delay
tuner
vcr/
V.AUX
stereo
level
up
down
dts
dvd /cd
rep.
mix
6 channel
tape
RDS
digital
cd
sat/cab
dvd/
theater
modes
delay
tuner
vcr/
V.AUX
stereo
level
up
dts
6 channel
TUNING
M
BAND
SOURCE
SOURCE
tape
RDS
pty
hifi
digital
cd
sat/cab
dvd/
theater
modes
delay
tuner
vcr/
V.AUX
stereo
level
up
dts
dvd /cd
6 channel
TUNING
M
BAND
SOURCE
SOURCE
TUNING
M
BAND
SOURCE
SOURCE
NOTE
Remote control selector must be on hifi.
NOTE
Remote control selector must be on vcr/sat
to operate VCR features.
NOTE
Remote control selector must be on vcr/sat
to operate SAT features.
