21
Fig. 21
8.
When the “Completing the Found New Hardware Wizard” window appears, click “Finish” to
complete the process (Fig. 21).
9.
The Thomson cable modem installation is now complete. To validate a proper installation,
perform the following instructions:
•
Click on the “Start” icon in the lower left-hand corner of your screen.
•
Select “Settings,” followed by “Control Panel.” The “Control Panel” window will appear.
•
Double-click on the “System” icon, and select the “Device Manager.”
•
Scroll down the list until you come to “Network Adapters.” Double-click on “Network
Adapters.”
•
The “RCA or Thomson USB Cable Modem” should exist. If “RCA or Thomson USB Cable
Modem” does not exist, the cable modem was
NOT
installed correctly. Go to Solution 2 on
page 35.
Connecting the Cable Modem
16193030 IB
2/6/03, 10:12 PM
21
