DFT-6600 Battery Charger-Discharger Users Manual
3
There are traditional main 2 ways to monitor the voltage of a single-cell: manual and wired automatic
measurement.
Due to manual measurement inability to achieve continuous and synchronous in time with more human error and
low precision, it is impossible to make a more accurate and objective judgment on the performance of the battery,
and the workload is large.
Although the wired automatic measurement improves the speed and accuracy of data acquisition and reduces the
workload relative to manual measurement, but there are more connections and complex operations, taking the
detection of a string of 24 single-cells as an example, it is necessary to lead 25 single test cables from the host to
connect to the battery string, and its length is less than one tester, more than ten tester, which not only increases the
purchase cost of the users, but also because the connection cable is more and longer, it is easy to cause connection
errors, and it is impossible to avoid the safety hazards such as connection cable damage.
The tester is used of single-cell detection & string dishing with Wi-Fi transmission single-cell voltage acquisition
system, which effectively overcomes the shortcomings of the traditional single-cell battery voltage monitoring
method. Wi-Fi transmission single-cell voltage acquisition system, each Wi-Fi transmission single-cell voltage
acquisition system can simultaneously collect multiple sections of single-cell voltage, and Wi-Fi send the detection
results to the host, convenient for the construction of the test environment and measurement control and data
distribution.
So the use of new single-cell detection & entire string discharge tester to monitor the single-cell, without the need
to connect the single-cell and the host, you can directly detect, easy use, reduce the purchase cost of users
