DFT-6600 Battery Charger-Discharger Users Manual
21
If monitor the single-cell, it is necessary to determine whether the total positive or total negative of the battery
string where the first No. 1 battery on the located site, and then tick the total negative or total positive option.
After setting the charging parameters, press the [Even or Float] button enters the charging mode selection: Even
charge current, Float charge voltage, Total charge time, Max. even charge voltage and Even charge Stop current.
After the charging parameters are set, press the [Start] key to enter the charging state.
Press the [Charge Info] icon to enter the following interface:
Press the [V-I Trend] icon to enter the following interface:
