7
3660181C
Charging and Batteries
Step 2: Install the Gateway Battery
Should the electricity go out, this will provide backup power to the Gateway:
Ensure the power cord is unplugged. Remove the
battery cover on the rear panel. There are two battery
compartments. One battery is included with the
Advanced Cable Gateway.
(To order additional compatible
batteries visit:
www.thomson-store.com
)
Push the slider up/down to allow for battery insertion.
Insert the battery into the compartment marked
“
Battery 1
”.
Readjust the slider to prevent the battery from moving
and replace the battery cover. Plug the power cord into
an electrical outlet that is not controlled by a wall switch
(this will assure that the unit has uninterrupted power).
The battery will fully charge within
5 hours
.
CAUTION
:
To reduce the risk of fire, personal injury or damage to the product, use only compatible rechargeable
batteries. The use of a non-rechargeable or incompatible batteries may damage the product and may be hazardous to
health.
