5
Connections and Set-up
EN
Switching on
Follow the instructions on this page on how to switch on your TV set and the remote control before going on to the following pages that
describe how to use the remote control and the channel set-up procedure.
1.
Insert two LR06 or AA batteries in the remote control.
2.
Connect the TV set to a mains socket.
Your TV set should only be connected to a 220 - 240 V ~ 50 Hz AC supply.
It must not be connected to a DC supply. If the plug is detached from the cable, do
not, under any circumstances, connect it to a mains socket, as there is a risk of
electric shock.
Equipment for the UK and Ireland is supplied with a mains cable fitted with a
moulded plug.
This plug contains safety components and must not be replaced by one sold by
general retailers. It is fitted with a fuse that protects your television. If your set has
stopped working, the fuse may have blown. If it has, replace it with an identical ASTA
or BSI certified (BS1362) 5-amp fuse.
3.
Connect the outside aerial or cable network to the antenna connector (labelled
ANTENNA
) on the rear panel of the TV set.
The aerial socket (75 Ohms - VHF / UHF / cable) can be used for connecting an
external aerial or other equipment fitted with a modulator (video recorder, satellite
receiver, etc.).
We recommend that you do not connect other equipment (video recorder, satellite
receiver, etc.) to your TV set to begin with, so as not to complicate the set-up
procedure with the additional steps involved. Connect them when you have finished
setting up the channels by referring to page 16 of this manual.
4.
Turn the mains switch on the rear side of the set to position “
I
”.
5A
220 - 240 V ~ 50 Hz
Mains socket in
continental Europe
Please respect the environment and the relevant regulations. Before you dispose of
batteries (or accumulators), ask your dealer whether they require special recycling
and if he is able to take them back.
42PB120S5-EN2 22/03/05 15:37 Page 5
