9
Getting started
Remote control TV functions
Most of your television’s functions are available via the menus that appear on the screen .The remote control
supplied with your set can be used to navigate through the menus and to configure all the general settings.
This page contains the description of the remote control.
Standby / quit standby
.
DVD
To access DVD mode.
VCR
To access VCR mode.
TV
To access TV mode.
Press this button to control the television.
Light
To provide information:
- it lights up when you press a button
- it indicates the status when the remote control is being
programmed (see page 10)
- if the batteries are run down, it flashes when you press
a button.
To control the volume.
This function is also available in
VCR
and
DVD
modes.
To switch the sound off and back on again.
RETURN
To return to the previous menu or the previous program
PR+/PR-
To change channels
EXIT
To exit a menu
MENU
To access the
OVERVIEW
menu
To select menu options
To set functions, change values, enable and disable
functions, and to select the picture format (In TV, AV and
PC mode)
OK
To confirm a selection.
Coloured buttons:
PRESETS
(
red
button) picture preset settings
Zzz/LIST
(
green
button) sleep timer setting
INFO
(
yellow
button) status information
GUIDE
(
blue
button)
disabled in TV mode
TEXT
(
purple
button) Teletext
The coloured buttons can also be used for operating Teletext.
0-9
To select a channel by its number.
Single digit entry is the default so in the case of channel numbers with two
digits, press 0 to display “--”, then enter the channel number.
AV
To select an appliance connected to an AV socket.