background image

5

3 .

Remote control:

Remove the cover of the battery compartment.
Insert the 2 batteries supplied (Type AAA 1.5V)

.

Precautions on using batteries:

- Only use the battery types specified.
- Make sure you use the correct polarity.

- Do not mix new and used batteries.
- Do not use rechargeable batteries.

- Do not expose batteries to excessive heat, throw them in a fire, recharge them or try to open
them, as this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long period of time
(several weeks)

.

4.

 

Power :

Connect the female plug of the power cord to 

AC IN

 power input at the back of

the set.
Then connect the male plug of the power cord to the wall outlet

Your TV set should only be connected to a 220 - 240 V ~ 50/60 Hz AC supply.
It must not be connected to a DC supply. If the plug is damaged, do not, under any
circumstances, connect it to a mains socket, as there is a risk of electric shock.

5.

 

Turn the TV on:

Press the On/standby button at the topside or on the front of the TV to turn it on,
the indicator in front turns green.

When TV set is in stand-by mode, the indicator in front of the TV illuminates amber.

MORE INFO

RC 311TR1 operate most DVD players and recent video recorders made by Thomson, Saba,
Brandt, Ferguson and Telefunken (refer to page 6).

Please respect the environment and the relevant regulations. Before you
dispose of batteries (or accumulators), ask your dealer whether they require
special recycling and if he is able to take them back

.

and if he is able to take them back

Summary of Contents for 20LW030B5





















Reviews: