- EN 8 -
Dimmer
NOTE:
This function can be used in both “Standby Mode” and “Turned On Mode”
1) Press the “SNOOZE / DIMMER” button to select dimmer. (FM version)
2) Press and hold the “MENU / SNOOZE / DIMMER” button to select dimmer. (DAB version)
Dimmer has 3 steps (100% brightness -> 30% brightness -> 0% brightness)
Sleep (FM version)
NOTE:
The system must be in “Radio mode” in order to set the sleep timer
1) Press the “SLEEP” button to enter.
2) Press the “SLEEP” button to set SLEEP time (120, 110, 100
10, 5, OFF)
3) To cancel SLEEP, follow above step 1 to 2 and set the SLEEP time to “OFF”.
Sleep (DAB version)
NOTE:
The system must be in “Radio mode” or “DAB mode” in order to set the sleep timer.
Press and hold the “INFO / SLEEP” button to enter the sleep function. Press “INFO / SLEEP” button
shortly to adjust the sleep timer in 10 minutes steps from 120 minutes to 10 and 5 to OFF.
Listening to the FM Radio
1) Press the “STANDBY / MODE” button to turn on the device to listen the FM radio. (FM version)
2) Press the “STANDBY / FUNCTION” button, until “FM” is shown in the display. (DAB version)
2. There are two options to search for and preset radio stations.
• Automatic scan for FM stations:
Press the “SCAN +” or “SCAN -” buttons for approx.2 seconds, the device will search to the previous
or next radio station respectively.
• Manual scan for FM stations:
Briefly press the “SCAN +” & “SCAN -” buttons, until you have found the radio station which you are
looking for.
Automatic preset station (FM version) :
1) Press and hold the “TIME SET/SCAN” button on unit for about 2-3 seconds to start the automatic
preset process.
2) Display will show the memory sequence number and radio stations will be automatically preset
into the sequence number (Note: Each sequence number means 1 preset station while during
automatic preset process.)
3) Once all the stations were preset, press the “PRE +” button until you see memory sequence
number.
4) Press the “SCAN +” or “SCAN -” buttons to search for the desired preset station.
5)
Press “PRE +.” button to confirm and listen to your desired radio stations.
Automatic preset station (DAB version) :
Press and hold the “SCAN / MODE” button for approx.3 seconds. The system scans the entire
frequency band for radio stations. Any stations found will be preset from lowest to highest frequency.
Manual memory preset (FM version) :
1) Search for a station as described in “Automatic scan for FM stations” or “Manual scan for FM stations”.
2) Press “TIME SET/SCAN” button to enter manual preset station setting.
3)
Display will show “P01” flashing.
4) Press “ SCAN +” or “SCAN -” buttons to choose preset station number.
5)
Press “TIME SET/SCAN” button to confirm chosen preset station number.
6) Once the stations were preset, press the “PRE +” button until you see memory sequence number.
