7
Assembly Instructions
NOTE
: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make the assembly easier.
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Securely screw the Cam Bolts (2) into the designated small holes on the Panels (A, D and E) with a
Phillips screwdriver. DO NOT overtighten the Cam Bolts.
NOTE:
Screw-in cam bolts must be screwed down flush.
3.
Glue twelve 30 mm Wood Dowels (3) into the inner holes on the Top Back Stretcher (C) and the Side
Panels (D and E). Make sure that you use a small amount of glue with both ends of all dowels.
NOTE
: It is very important to use a small amount of glue on both ends of dowels.
2
D
E
A
3
3
C
E
D
3
3
3
3
3
3
3
3
3
3