11
Assembly Instructions
11.
Using the wood dowels as a guide, align and attach the assembled Base Stretchers (H and I) to the
Bottom Panel (B) and tighten them with fourteen 38 mm Screws (5).
12.
Now, go back and securely tighten all the bolts and screws. Make sure that all the parts are tight and
there are no gaps between the parts. This will help keep the unit square.
13.
Using the pilot holes as a guide, unfold the Back Panel (G) and align the pre-drilled holes against the
upper long edge with the pilot holes on the Top Back Stretcher (C). Attach the Back Panel (G) in place
with 15 mm Washer Head Screws (7) provided.
NOTE:
We recommend attaching the back panel with Pan Head Screws at the corners first.
7
G
G
E
G
The adhesive tape faces outward.
H
H
I
I
B
5
5
5
5
5