2021-04
Putting into Service
• Carefully remove the transport protection and the packaging.
• Keep the packaging material and small parts out of the reach of children to prevent swallowing or choking.
• The product can be used in any bed. Put the mattress with the red side up onto the slatted frame or your bed’s sup-
porting structure.
• The mattress can also be used without any slatted frame. In this case, there has to be a support surface of at least
13 cm / 5.1" in width on the long sides.
• Please note: For beds with side rails, side rail risers might be need.
Assembly
Please note, that the ThevoSleepingStar mattress is delivered in an extra carton. The system is delivered in two parts.
(Fig. 7)
1.
Please put the two parts close together, so that the side elements fit into each other. (Fig. 8)
2.
The connection thorns have to be pressed tight and flush into the side elements at the connection points 1 to 6.
(Fig. 9 + 10)
3.
Lay the black part of the cover on the existing slatted frame or inlay frame of the bed. Put the underframe on the
cover. Please pay attention to the label for the foot and head section. (Fig. 11)
4.
Pull the belt straps through the holes on the bottom side of the cover. (Fig. 12)
5.
Lay the mattress on the underframe. Put the blue part of the cover over mattress and underframe and close the zip-
per. (Fig. 13)
Important hint: ThevoSleepingStar can also be used without a pre-existing slatted frame. In this case the supporting
surfaces along the sides of the bed base must be at least 10 cm (3,9") wide.
Hint: If you have a bed with side rails you will probably need to use side rail extensions
6.
The underframe of ThevoSleepingStar is safely fixed to the bed frame with the 4 (6) belts. Thread the belts through
the bottom holes of the active side element and then around the tubular frame of the bed. Thread the belt through
the buckle and pull it tight. To release the belt, open the buckle and pull out the belt. (Fig. 14)
Attention: If you have a height adjustable bed, please fix the belts to the lifting system.
Teaching the User
The user is taught how to use this device by trained staff who will reference these Instructions for Use.
Adjustment Options / Features
Standard setting at delivery
On delivery the adaptors of ThevoSleepingStar are all set vertically.
Adjusting the adaptors
To adjust the adaptors grab below the mattress and pull the flexible fibreglass-track slightly upwards. Now you can turn
the adaptor to the desired direction or rather remove it completely. Please ensure that the adaptor grips tight into the
stabiliser after every adjustment. Only this prevents from unintended turning of the adaptor.
• Vertical adjustment of the adaptors: stiff
• Horizontal adjustment of the adaptors: soft
• Adaptors removed: very soft
Instructions for Use –
Thevo
Sleeping Star
18
