12
Purpose and use
The Swifty Reha-Buggy is suited for the ergonomic transfer (push brace with adjustable height) of handicapped children, both outside
and inside.
Risks and contraindications
Proper handling may avoid any use-related risks. No contraindications are known.
Technical specifications
Swifty Reha-Buggy
Seat depth
(with seat minimizer (accessory))
22 (17 cm) - 28,5 cm / 8.7 (6.7") - 11.2"
Seat width
(with seat minimizer (accessory))
34 cm (23 cm) / 13.4" (9.1")
Back height
62 cm / 24.4"
min. shoulder height
with seat minimizer
26 cm / 10.2"
Lower leg length
(with seat minimizer (accessory))
16 (12 cm) - 33 cm / 6.3 (4.7") - 13"
Hip angle
90° to 115°
Foot angle
90°
Seat tilt fix
+15°
Footrest size
(W x L)
31 x 18 cm / 12.2 x 7.1"
Overall dimensions
(W x H x L)
61 x 102 x 98 cm / 24.0 x 40.2 x 38.6"
Dimensions when folded
(W x H x L)
61 x 38 x 73 cm / 24.0 x 15.0 x 28.7"
Push bar height
80 - 119 cm / 31.5 - 46.9"
Wheel size, swivel wheels
(front)
7,5"
Wheel size
(rear)
10"
Weight
12.4 kg / 27.3 lb
max. carrying capacity basket
(accessory)
3 kg / 6.6 lb
max. carrying capacity
35 kg / 77.2 lb
Folding
NOTE:
Please make sure that the buggy does not hit the floor during the unfolding and folding process to avoid twists and damages
of product components. Make sure that the plastic plug of the folding mechanism is in the right position (higher end of the
plug has to show to the back side of the buggy). (fig. 2)
Unfolding
Take hold of the buggy by the top side of the push bar and firmly pull it open (the sliders will lock audibly into place). Make sure that
the safety bar is placed over the tube of the rear frame. Tighten the lever on the back of the buggy. Set the height-adjustable push bar
to the desired position using the buttons on the sides. (fig. 1)
Folding up (minimum size)
Release the quick-release mechanism on the back of the buggy. Pull up the sliders on the left and right bars and hold onto the safety
bar mounted on the right. Use your upper body to push the push bar forwards and fold the buggy. (fig. 2)
TIP:
To avoid the front wheels coming into contact with the rear axle when folding the buggy, you can give the steering forks
on the front wheels a slight turn.
Adjustment options
Seat depth
Loosen the two star grips beneath the seat and pull out the seat section towards you. The seat upholstery does not need to be removed
to adjust the seat depth. Once you have made the adjustment re-tighten the star grips. (fig. 3)
TIP:
To make setting the seat depth easier, grasp the front edge of the seat surface with one hand while pressing your other hand
against the bottom centre of the backrest.
