Seite
36
von
48
Follow these steps:
1. Before changing the granulat, turn off the machine by switsching
the main-switch to
“0”and disconnect the power plug
2. Open the top cover.
Remove the cover sheet on the polishing bin by loosening and
removing the star grip (See picture 1 + 2).
3. Vacuum out the granulate with a vacuum cleaner (See picture 3).
Clean the Interior area if needed.
4. Spray cleaning alcohol on the polishing bin, cover sheet and top
cover and wipe Off with a dry cloth.
5. Remount cover sheet after cleaning.
6. Insert a complete filling of original Dörr polishing granulate Type
SG 8000 into the polishing bin and then close the top cover.
7. Connect the power plug to the electrical outlet and turn the
machine on by using the main-switch.
8. Push the reset button for 5 seconds (reset button see on page 8).
9. Turn the machine off again for 4 seconds by using the main
switch.
10.When starting the machine again the time is reset to zero and the
machine is ready for operation.
Picture 3
Summary of Contents for TD 8000 M16
Page 47: ...Seite 47 von 48 12 Notes en...
