Seite 28 von 36
WARNING!
Damage may occur to the frame and / or the electronics
The in and outside of the machine should never be exposed to water.
Never hose down the machine or use a high pressure cleaner on it.
Never use cleaning powder, acid, leaching, steel wool or wire brushes to clean
the machine.
5.2 Washing the brushes
The brushes should be washed after approx. 1-2 weeks, depending on the daily
operating hours, because of hygienical reasons. Also wash the brushes if they are
dirty.
Folow these steps:
1. Turn off the machine by switching the main switch to the “0” position and pull the
power cord from the outlet.
2. Remove the dirty brushes (see chapter 4.4
adjustments of the glass polishing
machine
).
3. The
brushes can be washed with max. 40°C hot water in the supplied wash bag in
the washing machine without spin and a gentle detergent (do not use aggressive
rinse and bleach!).
4. Dry
the brushes off with a clean cloth. Then place the brushes on the machine and
simply let it dry on the machine. Alternatively, the brushes can be hung up to dry
overnight.
The brushes can alternatively be washed by hand and a gentle detergent (do
not use aggressive rinse and bleach!).
Independent of the type of cleaning: Do not use (mild) rinsing and bleaching
agents! To prevent damage to the brushes, attach the supplied protective
plugs before washing (see Picture 1 + 2).
Picture 1
Picture 2
en
