background image

Figure 5

#6-32 SCREW

REMOVABLE TABS 

FOR WIRE FEED

PARTITION USED 

TO CLOSE AN 

OPEN TAB

PARTITION MAY BE 

USED TO SEPARATE 

SERVICES

Figure 4

REMOVE RETAINERS

PRY HERE

Figure 3

ACTIVATION

1.   Locate the box and remove concrete from 

access frame. Break off plastic retainers (2) 
and use knockout to remove plate. See 

Figure 3

.

2.   Install devices in accordance with N.E.C. or 

prevailing local codes.

3.   Place non-metallic tunnel in box to separate 

services by removing selected tabs for feed 
through. The snap-in parition can be used to 
isolate services or to close an open tab. See 

Figure 4

.

4.   The device panels are installed by locating the 

bottom edge in the locking tabs on the non-
metallic tunnel and securing the top with the (2) 
#6-32 screws furnished. See 

Figure 5

.

5.   Complete the activation with the 665-CST cover 

using the (4) #8-32 screws furnished.

This box is UL listed for carpet use only with 665-CST cover.

WARRANTY:

 Thomas & Betts sells this product with the understanding that the user will perform all necessary tests to determine the suitability of this product for 

the user's intended application.  Thomas & Betts warrants that this product will be free from defects in materials and workmanship for a period of two (2) years 
following  the  date  of  purchase.  Upon  prompt  notification  of  any  warranted  defect,  Thomas  &  Betts  will,  at  its  option,  repair  or  replace  the  defective  product  or 
refund the purchase price.  Proof of purchase is required. Misuse or unauthorized modification of the product voids all warranties.

Limitations  and  Exclusions: 

  THE  ABOVE  WARRANTY  IS  THE  SOLE  WARRANTY  CONCERNING  THIS  PRODUCT,  AND  IS  IN  LIEU  OF  ALL  OTHER 

WARRANTIES  EXPRESS  OR  IMPLIED,  INCLUDING  BUT  NOT  LIMITED  TO  ANY  IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A 
PARTICULAR  PURPOSE,  WHICH  ARE  SPECIFICALLY  DISCLAIMED.  LIABILITY  FOR  BREACH  OF  THE  ABOVE  WARRANTY  IS  LIMITED  TO  COST  OF 
REPAIR OR REPLACEMENT OF THE PRODUCT, AND UNDER NO CIRCUMSTANCES WILL THOMAS & BETTS BE LIABLE FOR ANY INDIRECT, SPECIAL, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Thomas & Betts Corporation

Memphis, Tennessee

www.tnb.com

TA01116  B

Page 2 of 2

© 2010 Thomas & Betts. All Rights Reserved.

Reviews: