thomann xBrick Full-Colour 16x3W, User Manual

Page: 29 / 44

Press [MENU] repeatedly until the display shows ‘Channel Mode’ . Press [ENTER] . Now use the
[Up] and [Down] buttons to select one of the following DMX operating modes: 5-channel ( ‘5 Ch
Mode’ ) or 13-channel ( ‘13 Ch Mode’ ). This setting is only relevant when the device is controlled
via DMX.
When the display shows the desired value, press
[ENTER] to return to the main menu or [MENU]
for at least two seconds to switch immediately in operation mode
„
DMX
“
.
Press [MENU] repeatedly until the display shows ‘Slave Mode’ . Press [ENTER] . Use the [Up] and
[Down] buttons to select ‘Master Mode’ , ‘Slave1 Mode’ or ‘Slave 2 Mode’ .
When the display shows the desired value, press [ENTER] to confirm the selection and return to
the main menu.
In the operating mode
„
Master/Slave
“
, the master and the connected devices configured as
„
Slave 1
“
operate synchronously. The devices configured as
„
Slave 2
“
operate mirror-inverted
to the master.
Operating mode
„
DMX
“
Operating mode
„
Master/Slave
“
Operating
xBrick Full-Colour 16
×
3W
29