Press
[MENU]
repeatedly until the display shows
‘DMX Address’
. Press
[ENTER]
. Now you can set
the number of the first DMX channel to be used by the device (DMX address). Use the
[Up]
and
[Down]
buttons to select a value between 1 and 512.
When the display shows the desired value press
[ENTER]
to return to the main menu.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode
Highest possible DMX address
5-channel
508
13-channel
500
DMX address
Operating
LED floodlight
28
Summary of Contents for xBrick Full-Colour 16x3W
