thomann Varytec LED Accu Pad 7 7x10W RGBAWUV, User Manual

Page: 39 / 64

Press [MENU] . Press or repeatedly until the display shows ‘CHnd’ . Press [ENTER] . Now use
or to select one of the following DMX operating modes:
n
‘1CH’ (one channel)
n
‘2CH’ (two channels)
n
‘8CH’ (eight channels)
n
‘11CH’ (eleven channels)
This setting is only relevant when the device is controlled via DMX. When the display shows
the desired value, press [ENTER] to confirm the selection and then [MENU] to return to the
parent menu. To return to the parent menu without making changes, press [MENU] .
Press [MENU] . Press or repeatedly until the display shows ‘Auto’ . Press [ENTER] . Now use
or to select one of the 20 preprogrammed automatic shows ‘At01’ to ‘At20’ . Press [ENTER] .
Use or to select a value for the progress speed between 1 and 31 (display shows ‘SP1’ …
‘SP31’ ). When the display shows the desired value, press [ENTER] to confirm the selection and
then [MENU] to return to the parent menu. To return to the parent menu without making
changes, press [MENU] .
This setting is only relevant if the device is not controlled via DMX. The device can operate in
stand-alone mode or control connected devices of the same type, that must be configured as
slaves. The auto show can only be activated on the master device.
DMX mode
Operating mode ‘Auto 1’ ~ ‘Auto
20’
Operating
LED Accu Pad 7 7x10W RGBAWUV
39
battery spot light