thomann Varytec LED Accu Pad 7 7x10W RGBAWUV, User Manual

Page: 42 / 64

Press [MENU] . Press or repeatedly until the display shows ‘rELE’ . Press [ENTER] .
Press [ENTER] again. The display shows ‘UIFI’ .
Press [ENTER] to enable the wireless module and then use or until the display shows ‘on’ .
Confirm with [ENTER] .
Press [ENTER] to disable the wireless module and then use or until the display shows ‘oFF’ .
Confirm with [ENTER] .
Press [MENU] twice. Press or repeatedly until the display shows ‘rELE’ . Press [ENTER] .
To disconnect a current connection, keep or pressed until the display reaches ‘200’ and
changes to ‘YES’ . This interrupts the existing wireless connection. Press the connection button
on your transmission unit. The LED [SIGNAL] flashes, the device is connecting to the transmis‐
sion unit. Once the connection has been successfully established, the LED [SIGNAL] lights con‐
stantly.
Then switch to DMX mode. Press
‘MENU’ and use then or until the display shows ‘Addr’ .
When using the wireless DMX function, unfold the antenna for wireless DMX control from the
bracket and determine a proper alignment for transmission.
Enabling or disabling wireless
DMX
Operating
42
LED Accu Pad 7 7x10W RGBAWUV
battery spot light