thomann Tour Guide TG 16 HAT, User Manual

Page: 27 / 56

1 [POWER / MUTE]
Power switch. Turns the device on and off or mutes it. To turn the device on and off, press the switch for about three
seconds. Press the switch once briefly to mute or unmute the microphone.
2 LED to indicate the operating status. The LED lights up green when the device is turned on. The LED flashes when the
device is muted and it lights up red when the charge of the built-in battery is too low.
3 Display.
4 [GAIN]
Rotary control to adjust the volume (under the removable microphone head).
5 Removable microphone head (with screw-cap).
6 Removable cover for the battery compartment.
7 Battery compartment.
7 [SET]
Channel selection button. Transmitter and receiver must be set to the same channel.
The frequency range of the device is indicated below the button. The indication here must match the information on
the receiver.
Connections and controls
Tour Guide TG C18, C2, 16 HAT,16 R, 16 T
27