thomann The t.mix 20.12, User Manual

Page: 11 / 32

1 7" touch screen
2 [Select]
Selects the respective channel to perform tone control and assignment to outputs.
3 [Sig/Clip]
The LED lights up green when a signal is present at the respective input (level > -30 dB).
The LED lights up red when the signal level is too high and distortion due to clipping occur (level > +15 dB). In this
case, reduce the level with the [Mic/Line] control.
4 Controls [CH1] … [CH16] adjust the input signal to the working level of the unit.
Controls [CH17] … [CH20] adjust the input level.
5 [AUX Output 1 -8]
Selects the respective AUX bus to perform tone control and assignment to outputs.
6 [Stereo Link]
Input channels 1…16 and buses AUX1…AUX8 can each be paired as stereo channels. When pairing is on, the
button lights up blue.
7 [DCASet]
Confirmation button for setting up DCA groups that can control the volume of multiple channels with one fader
without mixing the signals into one signal.
8 [DCA 1] … [DCA 6]
Selection buttons for DCA groups
9 [Mixers / Meters]
Switches the display between the different display modes
Front panel
Connections and controls
20.12
11