thomann The t.mix 16.4, User Manual

Page: 19 / 28

6.4 Compressor
A compressor can be switched on for each input channel and each bus.
1.
Press one of the [Select] buttons for an input channel or one of the [FX Level] ,
[Aux1 Level] , [Aux2 Level] or [Main] bus selection buttons for a bus.
ð
The button of the selected input channel or bus lights up blue.
2. Press [COMP] .
ð
The menu for setting the parameters opens. The name of the input
channel or bus will appear in the upper left corner.
3.
Use the [Parameter] control to select, to set values, and to navigate the menu.
Pressing the control opens a menu item or confirms a setting.
The table below shows the available parameters and their ranges.
4. To finish the settings, press one of the [Select] buttons for an input channel or
one of the [FX Level] , [Aux1 Level] , [Aux2 Level] or [Main] bus selection buttons
for a bus.
ð
The button of the selected input channel or bus lights up blue.
Option Selection range Meaning
‘CH01’ … ‘Main’ Selects an input channel or bus
‘Thres’ ‘-30dB’ … ‘20dB’ Threshold
Can also be set directly with the
[EQ Freq / Pan / THR] control.
‘Attack’ ‘10ms’ … ‘150ms’ Attack time
‘Release’ ‘10ms’ … ‘1.0s’ Release time
‘Ratio’ ‘1.0:1’ … ‘Limit’ Ratio
Can also be set directly with the
[EQ Q / Send / Ratio] control.
‘Gain’ ‘0.0dB’ … ‘+24dB’ Gain
Can also be set directly with the
[EQ Gain / Level / Gain] control.
‘On’ , ‘Off’ Switches the compressor on or off. After it is switched on, the
corresponding button lights up.
Operating
16.4
19