thomann The t.mix 16.4, User Manual

Page: 17 / 28

6.2 Parametric equalizer
A parametric equalizer with four frequency bands can be switched on for each input
channel and each bus.
1.
Press one of the [Select] buttons for an input channel or one of the [FX Level] ,
[Aux1 Level] , [Aux2 Level] or [Main] bus selection buttons for a bus.
ð
The button of the selected input channel or bus lights up blue.
2.
Press [Hi / EQ1] , [Mid / EQ2] , [Lo-Mid / EQ3] , [Low / EQ4] to select a frequency
band.
ð
The menu for setting the parameters opens. In the upper left corner, the
name of the input channel or bus will appear, and in the the upper right
corner the number of the frequency band.
3. Use the [Parameter] control to select, to set values, and to navigate the menu.
Pressing the control opens a menu item or confirms a setting.
The table below shows the available parameters and their ranges.
4.
To finish the settings, press one of the [Select] buttons for an input channel or
one of the [FX Level] , [Aux1 Level] , [Aux2 Level] or [Main] bus selection buttons
for a bus.
ð
The button of the selected input channel or bus lights up blue.
Option Selection range Meaning
‘CH01’ … ‘Main’ Selects an input channel or bus
‘Freq’ ‘19.7’ … ‘20.16K’ Frequency
Can also be set directly with the
[EQ Freq / Pan / THR] control.
‘Q’ ‘0.4’ … ‘128’ Filter quality
Can also be set directly with the
[EQ Q / Send / Ratio] control.
‘Gain’ ‘-18’ … ‘+18’ Boost/Cut
Can also be set directly with the
[EQ Gain / Level / Gain] control.
‘Type’ ‘Peak’ , ‘Low’ , ‘High’ Filter type
‘On’ , ‘Off’ Switches the parametric equalizer on or off for the selected fre-
quency band. After it is switched on, the corresponding button
lights up.
6.3 Graphic equalizer
A 31-band equalizer can be switched on for the outputs MAIN and AUX.
Operating
16.4
17