thomann the t.bone GigA Pro, User Manual

Page: 32 / 52

1.
Use the jog wheel or the foot switch to select the transmitter which settings you want to
edit.
2.
Press [SET/HOME] to switch to the programming mode.
3. Turn the jog wheel until the desired menu item is highlighted in the display.
Press the jog wheel to call up the menu item.
ð
The last set value for this menu item is shown.
4. Use the jog wheel to select a new value.
Press the jog wheel to confirm the selection.
ð
The menu is closed, the display shows the set value.
5. Repeat the steps for all menu items which should be changed.
6.
Press [SET/HOME] to exit the programming mode.
The following table shows the setting options.
Programming mode
Operating
UHF wireless system
32