thomann the t.bone GigA Pro, User Manual

Page: 31 / 52

6 Operating
6.1 Receiver
Turn the jog wheel or press the foot switch repeatedly until the desired transmitter 1, 2, or 3 is
selected. The display shows the settings of this transmitter (programme). The LEDs light up in
the colour which corresponds to this transmitter.
1.
Turn on the transmitter and point the infrared sensor of the transmitter directly at the
receiver.
2. Press [ACT] .
ð
The message ‘ACT...’ in the display indicates that the synchronization is running.
3. After successful synchronization, the display appears in the default state. The battery
status of the transmitter with which you just synchronized is now displayed here.
If the synchronization has failed, the message
‘FAIL’ appears. In this case, hold the trans‐
mitter closer to the receiver and restart the synchronization.
normal operation
Synchronizing transmitter and
receiver
Operating
GigA Pro Pedal Set
31