thomann the t.amp Proline 3000, User Manual

Page: 21 / 32

8 Selector switch for operating mode
n
[PAR] : Parallel mode
n
[STR] : Stereo mode
n [BR] : Bridged mode
9 Ground/Lift switch
If hum is caused by a ground loop, you can use this switch to disconnect the connection between the earth pin of the
device and the signal ground of the device.
10 Lockable chassis connector (Speaker Twist) for speaker output in bridged mode (1+, 2+: positive; 1–, 2–: negative)
11 Lockable chassis connector (Speaker Twist) for speaker output for channel A (1+, 2+: positive; 1–, 2–: negative)
12 Lockable chassis connector (Speaker Twist) for speaker output for channel B (1+, 2+: positive; 1–, 2–: negative)
13 [RESET]
Resettable fuse. The fuse switches off at too high current consumption of the amplifier. Once the problem is solved,
the fuse will automatically be reset, the device is operational again. The switch can be used to force a reset.
14 Power cable.
15 Fan
Connections and controls
Proline 3000
21