7
[VOLUME]
Volume control.
8
[HIGH CUT ]
Controller for adjusting the frequency of the high pass filter in a range of 55 to 200 Hz.
9
[PHASE ]
If necessary, this switch shifts the phase of the subwoofer signal by 180 °. This avoids unwanted cancellation effects in
combination with other speakers.
10 LED
[POWER]
Power indicator. This LED lights up continuously during normal operation and turns off when the subwoofer is
turned off.
11 LED
[PEAK]
Indicates overload. If the LED flickers or is lit, the input signal level is too high.
Connections and controls
active speaker
18