For the assembly of the optional furniture door, a minimum of 75 mm must be provided for between the back outer edges and
the additional rack strips (see figure).
The back furniture door leaves sufficient room between the cabinet roof and the cabinet floor for feeding through cables.
)
'
6
Strike plate
8
Furniture door
D
System screw
E
Countersunk screw
Screw the strike plate for the furniture door at the back of the cabinet into the holes provided in the side panel, using two system
screws.
Place the cabinet on its side and screw on the two hinges of the furniture door using one countersunk screw and two system
screws for each hinge. Finally, insert the plastic covers supplied into the two hinges.
Installation
Thon Studio Rack 10U, 12U, 14U, 16U, 18U, 20U 50
13
