6.2 Setting up the receiver
Press
[SET]
to open the menu. Use the and keys and select
‘GRP’
. The field
‘GRP’
in the
bottom line of the display flashes. Confirm with
[SET]
. The set group flashes in the display. Use
the and keys to select the required group and press
[SET]
to confirm the setting and to
move on to the channel setting.
The field
‘CH’
in the bottom line of the display flashes. Confirm with
[SET]
. Use the and
keys to select the required channel and press
[SET]
to confirm.
The display shows the used transmission frequency in MHz that is assigned to the set combina‐
tion of frequency group and channel.
Transmitter and receiver must be set to the same combination of frequency group
and channel. If you use multiple wireless systems from this device family, for best
results you should assign all systems to the same frequency group, but give each
system a different channel.
Selecting frequency group and
channel
Operating
IEM 150
39
