![thomann T.Bone IEM 150 User Manual Download Page 37](http://html.mh-extra.com/html/thomann/t-bone-iem-150/t-bone-iem-150_user-manual_1107995037.webp)
Transmitter and receiver must be set to the same combination of frequency group
and channel. If you use multiple wireless systems from this device family, for best
results you should assign all systems to the same frequency group, but give each
system a different channel.
Alternatively to selecting the frequency group and channel, you can also set the transmitter
frequency directly.
To set the frequency directly, press
[SET]
to open the menu. Use the
[+]
and
[–]
keys and select
‘FRQ’
. The field
‘FRG’
in the bottom line of the display flashes. Confirm with
[SET]
. The first
three numbers in the frequency display flash. Use the
[+]
or
[–]
keys to increase or reduce the
displayed value. When the desired value is displayed, press
[SET]
. The last three numbers in the
frequency display flash. Use the
[+]
or
[–]
keys to increase or reduce the displayed value. When
the desired value is shown press
[SET]
to confirm the setting and exit the menu.
The display shows the transmitter frequency set in MHz.
To set the frequency directly
Operating
IEM 150
37