thomann STARVILLE MH-110, User Manual

Page: 33 / 52

Press [MENU] , then [UP] or [DOWN] until the display shows ‘Control Mode’ . Press [ENTER] . The
display starts to flash. With the buttons [UP] or [DOWN] you can now choose from the fol‐
lowing DMX operating modes: 9-channel or 14-channel. This setting is only relevant if the
device is controlled via DMX.
When the display shows the desired value, press
[ENTER] to save the settings and close the
submenu. To close the submenu and the main menu without making changes, press [MENU]
or wait for 5 seconds.
Press [MENU] , then [UP] or [DOWN] until the display shows ‘Slave Mode’ . Press [ENTER] . The dis‐
play starts to flash. With the buttons [UP] or [DOWN] you can now select an operating mode:
n
‘Slave’ : The device is controlled by another device, which is configured as master.
n
‘Master’ : The Master device sets the movements and light effects which are copied by the
devices configured as Slaves.
When the display shows the desired value, press [ENTER] to save the settings and close the
submenu. To close the submenu and the main menu without making changes, press [MENU]
or wait for 5 seconds.
This setting is only relevant if the device is not controlled via DMX.
Operating mode ‘DMX’
Operating mode ‘Master’ or
‘Salve’
Operating
MH-110 Wash 7x10 LED
33