thomann STARVILLE MH-110, User Manual

Page: 32 / 52

Press [MENU] , then [UP] or [DOWN] until the display shows ‘DMX Address’ . Press [ENTER] . The
display starts to flash. Now you can set the number of the first DMX channel to be used by the
device (DMX address). Use the buttons [UP] or [DOWN] to select a value between 1 and 512.
When the display shows the desired value, press [ENTER] to save the settings and close the
submenu. To close the submenu and the main menu without making changes, press [MENU]
or wait for 5 seconds.
Make sure that the DMX address matches the configuration of your DMX controller. The fol‐
lowing table shows the highest possible DMX address for the various DMX modes
Mode Highest possible DMX address
9-channel 504
14-channel 499
DMX address
Operating
moving head
32