thomann Starville EP1080, User Manual, Page: 31 / 60

This setting is only relevant if the device is controlled via DMX.
Press
[MENU] repeatedly until the display shows ‘Addr’ . Press [ENTER] .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use and to select a value between 1 and 512.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the respective highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
‘Nod1’ (4 channels) 509
‘Nod2’ (4 channels) 509
‘Nod3’ (4 channels) 509
‘Nod4’ (4 channels) 509
‘Nod5’ (6 channels) 507
‘Nod6’ (3 channels) 510
‘Nod7’ (1 channel) 512
DMX address
Operating
EP1080 Event Panel 1080 RGB
31