thomann Starville EP1080, User Manual, Page: 30 / 60

A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[MENU] repeatedly until the display shows ‘ShNd’ . Now you can select one of the pre‐
programmed automatic shows. Use and to select a value between ‘Sh 0’ and ‘Sh 8’ or
‘FAde’ .
To adjust the speed of the selected auto show, press [ENTER] repeatedly until the display indi‐
cates ‘SPxx’ . Now use and to select a value between ‘SP 1’ (fast) and ‘SP 8’ (slow).
Press [ENTER] to apply the settings. Press [MENU] for about one second or wait for about eight
seconds to close the menu without changes.
Operating mode ‘Preprog‐
rammed automatic show’
Operating
LED floodlight
30