thomann Stairville VF-1200 DMX VertiFog CO2 FX, User Manual

Page: 33 / 40

9 Troubleshooting
In the following we list a few common problems that may occur during operation. We give you
some suggestions for easy troubleshooting:
Symptom Remedy
The unit does not work Check the mains connection and the main fuse.
No response to the DMX controller 1. Check the DMX connectors and cables for proper connection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or alongside to high voltage cables
that may cause damage or interference to DMX interface circuits.
No fog output 1. Check the fluid level in the fog container.
2. Switch the device off and check the hose that leads into the fluid container
for flow.
Troubleshooting
VF-1200 DMX VertiFog CO2 FX
33