thomann Stairville Replay Show, User Manual

Page: 29 / 44

5.
Press [UP] or [DOWN] to increase or decrease the DMX value for ‘ DMX2’ and confirm
with ‘ENTER’ .
ð
The operating mode Override is activated. The signals of both DMX inputs are com‐
bined to form a new signal specifying a start address.
In BACKUP mode, the signal of the other input is accepted if no DMX signal is present at one
input.
1.
Press [BRIDGE] to enter BRIDGE mode. The LED lights.
2.
Press [UP] or [DOWN] until the display shows ‘ Bridge Mode06’ and confirm with [ENTER] .
3.
Press [UP] or [DOWN] until the display shows ‘ backup’ and confirm with [ENTER] .
ð
The BACKUP mode is activated. If a DMX signal is present at input 1, it is output at
the device output. If no DMX signal is present at input 1, then the signal from input 2
is output at the device output.
BACKUP
Operating
Replay Show
29