thomann Stairville Replay Show, User Manual

Page: 28 / 44

In LTP mode, the last DMX value has priority.
1.
Press [BRIDGE] to enter BRIDGE mode. The LED lights.
2.
Press [UP] or [DOWN] until the display shows ‘ Bridge Mode06’ and confirm with [ENTER] .
3.
Press [UP] or [DOWN] until the display shows ‘ LTP’ and confirm with [ENTER] .
ð
The LTP mode is activated. If two DMX signals are present at the inputs of the device,
then the last two changed values are applied.
In OVERRIDE mode, the signals of both DMX inputs are combined to form a new signal speci‐
fying a start address.
1.
Press [BRIDGE] to enter BRIDGE mode. The LED lights.
2.
Press [UP] or [DOWN] until the display shows ‘ Bridge Mode06’ and confirm with [ENTER] .
3.
Press [UP] or [DOWN] until the display shows ‘ override’ and confirm with [ENTER] .
4.
Press [UP] or [DOWN] to increase or decrease the DMX value for ‘ DMX1’ and confirm
with ‘ENTER’ .
LTP (Latest Takes Precedence)
OVERRIDE
Operating
DMX manager
28