A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting takes effect only when
the device is not operated under DMX control.
Press
[Mode]
repeatedly until the display shows
‘Pr.xx’
. Now you can select one of the preprog‐
rammed automatic shows. Use
[Up]
and
[Down]
to select a value between
‘Pr.01’
and
‘Pr.10’
.
Settings for programme 01:
For
‘Pr.01’
, you can choose from 13 predefined colours or blackout. Press
[Setup]
. With
[Up]
and
[Down]
your can now select one of the colours (display
‘1.__r’
to
‘13.on’
) or blackout (display
‘0.OFF’
).
To adjust the strobe frequency, press
[Setup]
again. The display shows
‘FS.xx’
. Now use
[Up]
and
[Down]
to select a value between
‘FS.00’
(slow) and
‘FS.99’
(fast).
Settings for programmes 02 to 10:
To adjust the programme speed, press again
[Setup]
. The display shows
‘SP.xx’
. Using
[Up]
and
[Down]
you can now select a value between
‘SP.01’
(slow) and
‘SP.FL’
(fast).
To adjust the strobe frequency, press
[Setup]
again. The display shows
‘FS.xx’
. Now use
[Up]
and
[Down]
to select a value between
‘FS.00’
(slow) and
‘FS.99’
(fast).
Operating mode ‘Preprog‐
rammed automatic show’
Operation
Quad Par Profile 5x8W RGBW 5x8W RGB WW
35
Summary of Contents for Stairville Quad Par Profile 5x8W
