thomann Stairville Quad Par Profile 5x8W, User Manual

Page: 18 / 64

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
You can install the device in either the hanging or standing position. During use, the device
must always be attached to a solid surface or to an approved support. Use the openings pro‐
vided on the two-piece bracket for attaching.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the device must be cordoned off.
The safety-rope must be attached to the bracket.
The infra red receiver for the remote control signals is located near the main LED on the front
panel of the device. Make sure it's not covered.
Options
Infra red receiver for the remote
control signal
Installation
LED-PAR
18