thomann STAIRVILLE PAR56 Active 300W DMX, User Manual

Page: 29 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘DISP’ . Press [OK] .
To enable the blackout function press one of the arrow buttons repeatedly until the display
shows ‘OFF’ . Press [OK] . From now on the display goes out if you do not press a button within
a period of two minutes. Once you press any button, the display becomes active again.
To permanently turn on the display, press one of the arrow buttons repeatedly until the dis-
play shows ‘ON’ . Press [OK] .
To return to the parent menu, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘MASL’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘-MA-’ . To configure the
device as a master, use the arrow buttons to select ‘ON’ . Press [OK] . The device is now config-
ured as master and sets the movements and light effects which are copied by the devices con-
figured as Slaves.
To return to the parent menu without making changes, press
[M] .
Display blackout
‘Master’ operating mode
Operating
PAR56 Active 300W DMX
29