thomann STAIRVILLE PAR56 Active 300W DMX, User Manual

Page: 28 / 48

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘DMX’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘MODE’ . Press [OK] . Now use
the arrow buttons to select one of the following DMX modes:
n
‘1CH’ (one channel)
This setting is only relevant if the device is being controlled via DMX. When the display shows
the desired value, press [OK] to confirm the selection and then [M] to return to the parent menu.
To return to the parent menu without making changes, press [M] .
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘DMX’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘ADDR’ . Press [OK] . Now you
can set the number of the first DMX channel used by the device (DMX address). Use the arrow
buttons to select a value between 1 and 512. (Display shows ‘A001’ … ‘A512’ ).
When the display shows the desired value, press [OK] to confirm the selection and then [M] to
return to the parent menu. To return to the parent menu without making changes, press [M] .
Make sure this number matches the configuration of your DMX controller.
DMX mode
DMX address
Operating
PAR
28