thomann Stairville PAR 64, User Manual

Page: 28 / 40

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SOUd’ . Press [OK] .
The device now shows an automatic colour change in the rhythm of the music.
This setting is only relevant if the device is not controlled via DMX. Press
[M] to return to the
parent menu.
Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘TEST’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘REd’ , ‘GREE’ , ‘bLUE’ or
‘STRO’ . Press [OK] . Now you can separately set the brightness of the LEDs for each colours red,
green and blue in a range from 0 to 255, or select the strobe rate from a range of 0 to 255.
This mode is also suitable to mix constant or flashing light from the three LED colours without
DMX control.
When the display shows the desired value, press the
[OK] button to confirm the selection and
then [M] to return to the parent menu. To return to the parent menu without making changes,
press the [M] button.
Sound control
Manual test
Operating
LED PAR
28