thomann Stairville PAR 64, User Manual

Page: 26 / 40

Press [M] . Press one of the arrow buttons repeatedly until the display shows ‘SET’ . Press [OK] .
Press one of the arrow buttons repeatedly until the display shows ‘dISP’ . Press [OK] .
To enable the blackout function press one of the arrow buttons repeatedly until the display
shows ‘OFF’ . Press [OK] . From now on the display goes out if you do not press a button within
a period of two minutes. Once you press any button, the display becomes active again.
To permanently turn on the display, press one of the arrow buttons repeatedly until the dis‐
play shows ‘ON’ . Press [OK] .
To return to the parent menu, press the [M] button.
To configure the device as slave, press one of the arrow buttons repeatedly until the display
shows ‘SLAVE’ . Press [OK] to confirm the selection. The device is now configured as slave and
follows the settings of the master device to which it is connected. Ensure that for all devices
configured as slave the DMX address is set to 001.
To return to the parent menu without making changes, press the
[M] button.
This setting is only relevant if the device is not controlled via DMX.
Display blackout
Operating mode ‘Slave’
Operating
LED PAR
26