If the device is correctly connected to a switched-on DMX controller, a flashing star appears in
the lower row of the display in ‘DMX’ mode. If the device does not receive a valid DMX signal,
the error message ‘DMX Fail’ is displayed.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Starting up
MH-x30 LED Spot
27
Summary of Contents for STAIRVILLE MH-x30 LED Spot
